EBI 16 data logger is an easy to use and reliable electronic measurement system. With this data logger, a comprehensive routine control of steam sterilizers can be performed using an alternative Electronic Bowie Dick Test according to DIN EN ISO 11140-4. The EBI 16 delivers clear results during daily checks of the air evacuation test and steam penetration test according to DIN EN 17665 and DIN EN 285. The EBI 16 provides early identification of possible failures in steam-sterilizers. Even small quantities of residual air that doesn`t lead to a failed Bowie Dick Test yet, are detected. The EBI 16 allows a reasonable vacuum check also for sterilizers without pressure display according to DIN EN 285. This multi-tasking data logger also checks the sterilization parameters such as compensation time, hold time, sterilization temperature and sterilization time according to DIN EN 285.

• Vacuum checks
• Steam penetration tests using an Electronic Bowie and Dick Test
• Comprehensive routine checks of steam sterilizers according to ISO 17665 and EN 285/EN 1360

With a memory capacity of 40,000 measurements the easy to use EBI 20 data loggers are suitable for the continuous documentation and monitoring of temperature. All EBI 20 data loggers are delivered with a factory calibration certificate and a user replaceable battery. The data loggers are particularly attractive because of their excellent price-performance ratio.

Applications

• Transport monitoring
• Storage monitoring
• Process monitoring

The EBI 25 data logger series are the perfect solution for continous temperature monitoring during transport and storage of temperature sensitive goods. This easy-to-use device maintains the quality of your goods during transport, storage and distribution without any loss of goods. Real-time monitoring of these devices maintains the quality of food so it is safe for consumption, unlike conventional temperature monitoring devices.

• Alarm via SMS or E-Mail
• Memory 288 measured values
• Software Winlog.web or Winlog.wave
• Up to 50 EBI 25 loggers can be registered on one interface
• Factory calibration certificate

The ebro® food oil monitoring set comes with a handy sensing device with which you can determine the quality of various oil types. The measurement is performed directly in hot oil – e.g in the deep fat fryer. This helps in determining the oil temperature in ̊C and the oil quality in percent TPC (Total Polar Compounds). The PC value is a measure for thermaloxidative utilization factor of a frying oil.

The TFI 260 is perfect for fast food inspection of food. The bright background lighting of the display makes it possible to read the measured values even in the dark. The antislip handle and trigger for the measurement are optimal for the application.

Portability and rapidity are the two most important features of the infrared thermometer TFI 260 by ebro^®. In less than one second, the device measures the surface temperature of objects or goods – for example food – within a measuring range of -60 °C to +550 °C. Direct contact is not necessary, so the hand-held device can obtain exact results even from a distance. The infrared thermometer is therefore ideal for fast and smooth checks of incoming and outgoing goods, and is suitable for other applications.

• Routine control of steam sterilizers
• Routine control of washer-disinfectors and washer-disinfectors for endoscopes
• Measurement range temperature -40 °C … +150 °C
• Measurement range pressure 1 to 4000 mbar
• Temperature accuracy ±0.3 °C
• Temperature resolution 0.1 °C
• Pressure accuracy ±20 mbar
• Pressure resolution 1 mbar
• Sampling rate 1 sec to 24 hours
• Data memory 27,000 measurement values

The ebro® product range includes a large number of thermometers for many different purposes. It includes core thermometers with fixed sensors or sensors connected by means of a cable, conformity-assessed laboratory thermometers for high-precision temperature monitoring, as required for food inspection purposes, contact thermometers and reference thermometers.

• Type T
• Food products laboratories
• Fast measurement
• Material ABS
• Replaceable battery
• Factory calibration certificate
• According to EN 13485

This true atmospheric distillation analyzer is extremely compact, portable and light weight and operates as a fully stand-alone unit. Designed for the quick and accurate quality control in laboratories and in the field, a distillation run on light products takes just 15 minutes and requires as little as 6 mL of sample. Because of its small size, the portable mini-distillation apparatus is the ultimate solution for places where limited or no lab-space is available.

MINIDIS ADXpert uses full automation from sample introduction to heating regulation, vapor temperature registration, volume measurement in the receiver compartment and calculation of the distillation curve from the raw data obtained during the test. This way it achieves the highest levels of accuracy, repeatability and reproducibility. The automatic operation involves simply inserting the filling tube into the sample container and pressing “RUN”. No sample preparation like cooling is necessary; neither special programming of the test conditions or prior distillation knowledge is required. Fully automatic cleaning programs and the use of inexpensive and disposable sample cups guarantee highest productivity and eliminate the need for manual cleaning of glassware.

MINIDIS ADXpert performs according to ASTM D7344, the New Mini-method for the Distillation of Petroleum Products at Atmospheric Pressure and generates detailed D86 test reports. The distillation apparatus has a resolution almost twice as good as D86 distillation units, yielding results that are well within ASTM D86 r/R requirements. The extremely versatile unit allows precise testing of various gasoline, jet fuel and diesel products (groups 0-4), biofuels, solvents, aromatics, organic liquids, chemicals and contaminated or blended samples.

The MINISCAN IR VISION is a high speed, compact and robust FTIR fuel analyzer for the comprehensive and automatic measurement of gasoline, jet and diesel fuels. The analyzer is configured to measure more than 100 fuel parameters and components for fuel blending, for quality inspection and to check compliance with fuel specifications directly at the point of sale.

The Miniflash Flash Point Testers are uniquely designed for the determination of flash points of liquids and solids, using the Grabner flash point detection method of measuring the instantaneous pressure increase inside the continuously closed chamber.

The Miniflash Flash Point Testers comply with the following standards:

• ASTM D 6450 (Flash Point by Continuously Closed Cup)
• ASTM D 7094 (Flash Point by Modified Continuously Closed Cup)

The Miniflash Flash Point Testers correlate to the following standards:

• ASTM D 93
• ASTM D 56
• ISO 2719 (EN/DIN 13736)
• ISO 13736
• IP 170

MINIVAP is a highly versatile portable vapor pressure tester that features best-in-class precision and a pressure range of 0-2000 kPa. It is the first analyzer that demonstrates excellence in engineering by earning certificates for robustness and durability. Based on Grabner´s cutting-edge Cockpit™ technology, the instrument offers unmatched networking capabilities and enables worldwide access to analyzers.

Have You Ever Thought About Reusing Your Microwell Plates?

The Purus Microwell Plate Cleaner is a new technology designed to bring sustainable practices into the lab, mitigate supply-chain constraints and reduce costs associated with single use plastics. The Purus removes chemical and biological contaminants from microwell plates so they can be reused. It also avoids high temperatures and corrosive chemicals, so that microwell plates are not compromised through repetitive reuse cycles. Purus can work as a stand alone instrument or be integrated with automated plate handlers.

Have you ever thought about how many pipette tips you have thrown? What if there is a way to reuse these plastic consumables to reduce your biohazard waste, save costs, while being more sustainable for the environment?

TipNovus™ is a bench top, high throughput device that enables laboratories to wash and sanitize pipette tips for reuse. Tipnovus™ enables labs to re-use plastic pipette tips numerous times, cutting associated consumable costs by up to 96%. The unique method of wash and sanitation is safe for both the lab and the environment.

TipLumis™ is a HEPA-filtered, temperature-controlled, storage cabinet that is used to expedite the drying process of washed pipette tips within a clean environment. This process uses a concentrated airflow through the tips along with an internal heating system. The TipLumis is fully programmable, it can easily adjust features such as dry cycle and temperature.

 

Key Features

• Temperature Controlled
• UV Sterilization
• Hepa Filtered
• Programable

These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg. If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml. The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.