AMADA – DC Inverter Welding Power Supply, IPB-5000B-MU

Description

It operates in constant current, voltage or power feedback modes and is also capable of welding in a combo mode (current and voltage) to address even the most challenging application or process conditions.

Key Features

• Control Modes – Optimum control modes for obtaining ideal weld quality and consistency can be chosen from; constant current control, constant voltage control, combination of constant current and constant voltage control, and constant power control.

• GOOD/NO GOOD determination – The comparator feature allows to set upper and lower limits around the measured value of up to four parameters; which are current, voltage, power and resistance. When those values reach out of the limits, an error signal or a caution signal alarms.

• Diplacement Measurement – Measures how much an electrode moves down because of material collapse during weld. Weld to displacement – stops welding when displacement value reaches the set value. Requires displacement sensor sold separately.

• Envelope – The envelope feature allows dynamic limits to be set around a monitored waveform to ensure the same resistance change occurs at the same rate for every weld.

Technical Specification

	IPB-5000B-MU
Power requirements	Three phase, 200-240 VAC or 380-480 VAC, 50/60 Hz
Primary frequency	5 kHz
Primary current	200 A
Current setting range	0.40 – 6.00 kA
Current monitor	0.00 – 9.99 kA
Displacement monitor	-29.999 mm to 29.999 mm
	For further details, please refer to enclosed brochure.