Our PEEK Fittings are biocompatible and offers excellent chemical resistance. They are simple to use and an economical choice. These fittings are offered in a fingertight style making them easy to tighten. We offer fittings and ferrules for your convenience. We offer our PEEK fittings in one and two piece options.

Our PEEK Fittings with Knobs are biocompatible and offers excellent chemical resistance. We designed these fitting to be simple, economic, and easy-to-use. It comes in one and two piece options. The multi-colored knob is designed to allow for easy identification.

Stainless steel fittings remain the most popular fitting used on standard HPLC systems today, due to their high temperature resistance and high-pressure holding abilities. Our durable and strong 316 Stainless Steel Fittings are rated to 20,000 psi (1,380 bar) when wrench tightened. You can choose our Standard Fittings, or select from other manufacturer-compatible offerings.

Our Sure-Fit™ connector gives you a perfect fit in nearly every 10-32 coned receiving port consistently for every connection. The Sure-Fit connector has a unique internal spring-tensioned mechanism that automatically self-adjusts to virtually any port depth while maintaining constant pressure on the 1/16 inches outer diameter tubing. Sure-Fit™ are available with both PEEK tubing or stainless steel tubing, in varying lengths and internal diameters, pre-assembled for ease of use.

Our unique Two-Piece Fingertight Fittings feature a separate ferrule. With a two-piece design, you can replace just the ferrule instead of the entire unit, making these Fingertights more economical than the one-piece version. Use a standard knurled head fitting for traditional fingertight applications, or use a fitting with wings built into the head for extra tightening leverage. A stainless steel hex headed fitting can be used for applications where a wrench may be needed for added tightening torque.

The dual compression created by the specially designed nut and ferrule enables the SealTight Fittings system to outperform standard finger tightened fittings. The forward cone of the SealTight Ferrule provides gripping power and a leak-free seal via conventional compression by the receiving port. The slotted end creates the second compression zone in conjunction with a SealTight Nut. All SealTight Nuts are for use with 1/16 inches outer diameter tubing and are designed to be used with the F-192 Ferrule.

NanoPort Assemblies provide consistent fluid connections for chip-based analyses. Our unique design prevents adhesive contamination of the fluid path. Once attached, NanoPort connections can withstand pressures to 1,000 psi (69 bar).* NanoPorts will adhere to silicon, quartz, glass and some polymers. All NanoPort components are made of inert, biocompatible PEEK polymer (nuts and ports) and perfluoroelastomer (ferrules and gaskets). NanoPort connections add no additional volume to the fluid path, virtually eliminating dead volume traditionally associated with chip-based fluid connections.

The Aqueous degassing chambers offer the highest flow rates and efficiencies available. The silicone based degassing membrane is completely non-porous providing long life that will not clog over time with excessive amounts of water coming through the vacuum side like with porous based high flow products. Couple the degassing chamber with a vacuum control system to maintain stable vacuum levels for optimal degassing efficiency.

Debubblers utilize a porous Poridex membrane to rapidly clear bubblers from locations where bubble introduction cannot be avoided. When Poridex is used as a degassing transfer line tail it can also remove dissolved gases in locations where a standard degassing chamber won’t fit. Due to the porous nature of Poridex it can only be used with water based solutions without detergents or emulsifiers.

The Stand Alone Degassers are designed for use alongside your fluidic system. Simply plug in the unit and route your fluids through the degasser for consistent gas free fluids.

The Mini Degassing Chambers provide degassing with long life and the widest range of chemical compatibility by using non-porous Systec AF. Couple the degassing chamber with a vacuum control system to maintain stable vacuum levels for optimal degassing efficiency.

The OEM line of degassing system products provide a complete open fame degasser ready to be integrated into your fluidic instrumentation. All OEM degassers utilize the non-porous Systec AF for the widest range of chemical compatibility and a lifetime that will last as long as the instrument. Each OEM system includes one or more degassing chambers and a vacuum control system.

The Preparative degassing chambers are designed for solvent HPLC based reagent compatibility and flow rates between 20-40ml/min. These chambers provide degassing with long life and the widest range of chemical compatibility by using non-porous Systec AF. Couple the degassing chamber with a vacuum control system to maintain stable vacuum levels for optimal degassing efficiency.

The Vacuum Control Systems are designed for use with any IDEX degassing chamber. The electronics are integrated and maintain precise vacuum levels for consistent error free degassing. The electronics are integrated for into the pump for the smallest form factor plug and play operation possible. Choose the “Prep” version of the pump for use with water based or high flow applications. Choose the “Analytical” version for low flow applications. The pumps are available with side mount or bottom mount screw holes.

Our uniquely designed Bottom-of-the-Bottle Filters effectively protect your system by filtering out particulate matter that my otherwise damage expensive hardware. Our durable stainless steel specifically designed to allow solvents to be drawn from within 1/8 inches of the bottom of your bottle. Our UHMWPE version allows tubing to pass through to the bottom of the filter cup, enabling the filter to draw solvent from within 0.10 inches (2.5 mm) of the bottom of your solvent bottle. This widely known and durable polymer is an economical choice. Our PEEK version is biocompatible and includes two built-in PEEK frits. Our PEEK frit (2 μm or 10 μm) will draw solvents from within 0.080 inches (2.0 mm) of the bottom of the solvent bottle. The 2μm frit on the side may be used for a 1/8 inches outer diameter helium sparging line.