The TSM N2 Reflow is a high-end reflow oven that provides precise temperature control for the most demanding soldering applications. It features a nitrogen atmosphere that minimizes oxidation and improves soldering quality, ensuring consistent and reliable results. With a compact design and intuitive user interface, the TSM N2 Reflow is a must-have for any electronics manufacturing facility looking to achieve the highest levels of quality and efficiency.

Key Features

• Realize Flux Zero in OVEN -> equip FMS applied with patent technology
• Thermal Interference Innovation in each zone -> Able to set up temperature difference with 60ºC in max. of interzone
• Internal Heat Reduction of Reflow -> apply New Emission System
• Real-time Monitoring,temperature Profile Monitoring and Oxygen Concentration Monitoring in each zone
• Conveyor Vibration Monitoring

The TRV series offers the outstanding productivity and safety operation of equipment. Particularly , the Compact Vacuum Chamber and Conveyor are technically proved solutions in the field through a technical partnership with ETC.

Key Features

• Completely sealable TSM’s vacuum Reflow, dedicated compression chamber
• Transfer System without jamming PCB (technical partnership with ETC)
• Prevent PCB Drop by minimizing the gab between in/outlet entrance of conveyor in vacuum chamber
• Strengthen durability without conveyor driven roller in high temperature section
• Able to correspond with minimized vacuum chamber with embedded vacuum pump
• Reduce time of vacuuming and easily control vacuum

The APOGEE 90 was built to fulfill the need for an affordable and reliable inspection system with advanced features for defect detection, failure analysis, and NDT in production environments. The system is capable of capturing the highest clarity 2D & 2.5D x-ray images that provide operators with confidence in their findings.

Key Features

• Powerful 90kV Sealed Microfocus X-ray Tube
• 4µm Focal Spot
• Oblique Angle Inspection up to 45°
• High Resolution 5” Digital Flat Panel Detector
• 6-Axis Motion Control
• Programable Automated Inspection Sequences
• Valuable Image Enhancement & Processing Tools (ie. Averaging, Contrast, Exposure, 9x Filters, Pseudo3D)
• Real-time Image Visualization & Image Capture

The most installed rework system in the world. The Summit 1800i is capable of handling boards up to 22″x30” and components as small as 01005. Built with easy-to-use 1-2-3-GO software, operation of this rework system is simple and intuitive. Efficient convection heating provides high thermal throughput, uniformity, and a repeatable rework process. Proprietary software provides product traceability, profile analysis, and sharing of profiles between VJE systems.

Key Features

• Easy-To-Use Auto Profiling Software
• Simple Component-to-Site Alignment
• Repeatable Thermal Performance
• Automatic Non-Contact Site Scavenging
• MES Interface
• Available Tooling for Any Surface Mount Component

Our rework system boasts user-friendly 1-2-3-GO software and efficient convection heating, along with proprietary software for product traceability and profile sharing between VJE systems. Automated features enable the reworking of large components, while non-contact site scavenging ensures the safe removal of residual solder. This system provides a reliable and efficient solution for rework processes.

Rework done on the Summit 2200i with Auto Align results in reliable, repeatable processes with greater system up-time, machine utilization, and a faster ROI.

Key Features

• 4.0kW/7.8kW Convection Bottom Heater
• 2.2kW Focused Convection Top Heater
• 01005 -120mm Component Range
• 0.0005″ Placement Accuracy
• 65mm/80mm Square FOV
• Multi-lens Optics & Digital Split Imaging
• Motorized & Programmable X,Y & Θ
• Automatic Non-Contact Site Scavenging
• Automatic Component Alignment (Including components >100mm)
• Automatic One-run Profiling

The cost-effective and high performance solution to your rework needs. The Summit 750i is capable of handling boards up to 18″x22” and components as small as 0201. Built with easy-to-use 1-2-3-GO software, operation of this rework system is simple and intuitive. Efficient convection heating provides high thermal throughput, uniformity, and a repeatable rework process. Proprietary software provides product traceability, profile analysis, and sharing of profiles between VJE systems.

Key Features

• Easy-To-Use Auto Profiling Software
• Simple Component-to-Site Alignment
• Repeatable Thermal Performance
• MES Interface
• Available Tooling for Any Surface Mount Component

The system’s advanced detection algorithms automatically recognize components without the need for cumbersome models, libraries, or cloud connection, making it quick and simple to use. Unique imaging technology provides the greatest count accuracy and reliability.

The XQuik’s flexible MES interface is easily configured to communicate with any inventory control system. Automatic detection determines whether a single, or up to four small reels are loaded, and keeps track of reel location, eliminating the risk of operator error.

Key Features

• One button operation
• Reel location and size automatically detected
• Automatic recognition of components
• Automatic inventory updates to your MES
• Scanning of (4) 7” reels simultaneously
• Scanning of 13” or 15” reels
• Industrial PC: Microsoft Windows 10

With a payload of 1000 kg, the L1000 is one of the most powerful autonomous mobile robots (AMRs). Designed to handle the heaviest workload in various facilities, as well as optimize intralogistics efficiency and throughput in warehouses, it automates the movement of goods, racks, and pallets.

The YOUIFLEET management system enables fleet collaboration across up to 1000 AMRs under one system, enabling a true ‘light-out’ operation.

Benefits

• Navigates dynamic environments efficiently
• Meet the safety standards of the industry with cost-effective AMRs
• Return on Investment is rapid